A new Series of 4 SIM Mobiles form QMobile F gave you 4 networks same time active good thing is that this phone have MTK based CUP MT 6261 which is the best CPU form MTK platform.
On this post we share both of sets flash files F1 flash file is .bin format so you can write this file with any chines flashing device and F2 flash files is feactory flash file for write this file you need SP Flash tool or CM2 chines flashing tool.
We read this file with CM2 here is flash log;
1. Power Off Phone , Remove battery , Insert back2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 2 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 7A11A59B83901392CB33C61CA51BEA8F
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...
Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : MXWD017_D_HL_M259_QMOBILE_PCB01_gprs_MT6261_S00.QMOBILE_F2_V07_10_04_2017.bin
FileVersion : QMobile_F2_V07_10_04_2017
[ScatCFG] : MT6261 / QMobile_F2_V07_10_04_2017 / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\MXWD017_D_HL_M259_QMOBILE_PCB01_gprs_MT6261_S00\
Done!
Elapsed: 00:00:18
Reconnect Power/Cable!
0 comments:
Post a Comment